DETAIL
Untapped thermal potential
If the compressor runs, but hardly any heat is removed, a consumer, a suitable control or sufficient operating hours on the heat side may be missing.
+49 7044 911 100Produkte · Sensoren · Wärmezähler für Wärmerückgewinnung
Heat meters for heat recovery
Wärmerückgewinnung spart nur dann nachweisbar, wenn nutzbare Wärmemenge und Betriebszeiten gemessen werden.
4–20 mATypical signal
10 sVisualization grid
24/7Monitoring
Why monitor?
What this parameter reveals about your compressed air station.
Aus Volumenstrom sowie Vor- und Rücklauftemperatur entsteht die tatsächlich übertragene Wärmemenge. Damit wird sichtbar, ob die im Kompressor entstehende Wärme im Heiz- oder Prozesssystem wirklich genutzt wird.
DETAIL
Detecting weak heat transfer
Too little temperature spread or falling thermal output can indicate a contaminated heat exchanger, incorrect hydraulics or too little water flow.
DETAIL
Detecting a lack of reconciliation
High return temperatures, frequent valve limitation or highly fluctuating decrease show that accumulators, pumps and consumers do not match the available heat.
In the Airleader system
One signal – multiple uses.
DETAIL
Live display
Current measured value and status are visible directly in the web visualization.
DETAIL
Long-term trend
10-second averages make deviations, shifts and recurring patterns comparable.
DETAIL
Alerts & Report
limit violations are reported; Values are included in energy, quality or maintenance certificates.
Initial technical consultation
Which solution fits your station?
In 30 minutes we clarify the station, load situation and the most sensible next step – free of charge and without preparation.