01
Efficiency
- Compressors operating in their optimum range
- Shared pressure band
- Almost no idle operation
+49 7044 911 100Intelligent control · 2–32 compressors
On average 30 % lower compressed air costs.
Manufacturer-independent compressor control with Airleader: less idling, stable system pressure and measurably lower costs—for every brand.
- 30 minutes
- Non-binding
- Without preparation
Selected customers
10,000+Installations worldwide
30+Years of experience
- Siemens
- Bosch
- BASF
- BMW
- Mercedes-Benz
- TRUMPF
- ZF
- Ritter Sport
Three optimisation goals
What Airleader improves in a compressor station.
Airleader coordinates the compressors as an overall system. This reduces energy consumption and wear and creates more transparency and security during operation.
02
Wear
- Fewer switching cycles
- Fewer operating hours
- Balanced compressor utilisation
03
Operational reliability
- Ongoing monitoring of all sensors
- Early warning of problems
- Automatic redundancy
Compressed-air costs over the life cycle
Where Airleader reduces costs
The coloured areas show the cost structure. Hatched areas indicate the share Airleader can save in loaded-operation energy, idle energy, service and wear.
Hatching: savings with Airleader
- 5 %Investment costs
- 75 %Loaded-operation energy25% savings
- 10 %Idling energy99% savings
- 10 %Service & wear40% savings
This is how it works
Switch compressors according to demand.
Airleader combines measurement, control and evaluation into a continuous control loop for the entire compressed air station.
- 01Measure
Detect demand in real time
Pressure, demand, power and machine states are captured together every second.
- 02Decide
Switch the right compressor combination
Airleader selects the available combination that meets demand with the least possible idling.
- 03Document
Visualize and document
Visualisation and reports make pressure, energy, costs and operating states transparent and traceable.
First orientation
How much potential is there in your station?
Three figures are enough for an initial estimate. A reliable calculation requires measured data from your station.
Estimated savings potential
€23,000/ yearRange €15,000 – €31,000
6 Compressors420 kW6,000 h/a
Jahresenergiekosten420 kW × 6,000 h/a × 35 % × 0,18 €/kWh = €158,760
EinsparpotenzialJahresenergiekosten × 9.6 % bis 19.6 %
Model estimate based on €0.18/kWh, 35% average load and typical optimisation ranges. This is not a binding business case.
Request a consultationNot yet ready for a conversation? See the references first.Measurement before promise
No black box. First understand, then invest.
One measurement week reveals the load profile, idle operation, pressure profile and actual power consumption. This produces a reliable simulation—including costs, savings and payback period.
- Real station data instead of nameplate values
- Before/after comparison with comprehensible key figures
- Clear basis for decision-making before implementation
The path to decision
From the first conversation to a reliable figure.
- 01Potential assessment
30 minutes about your station, load situation and objectives.
Non-binding - 02Measurement week
Consumption, power, pressure and conditions are recorded in real terms.
On site - 03Simulation
We compare the current state with the optimised operating strategy.
With your data - 04Decision
You learn the economics, recommended actions and the next sensible step.
Traceable